Audited Supplier
CV-1890
Online Support/Service at Customer Site
14 Months
Metal
Metal-Cutting CNC Machine Tools
Linear Control
Closed-Loop Control
CNC/MNC
0.01~0.02(mm)
Economical CNC Machine Tools
GS, CE, RoHS, ISO 9001, ISO 14000
New
16000kg
Josen
Wooden/Iron Bracket/Wooden Box
6000*5150*3465mm
Changzhou, Jiangsu, China
8457101000
Product Description
VMC1890 Advanced Technology Cost-Effective 3 Axis Metal CNC Machine Milling Cutting CNC Machine Tool Vertical Machining Center
Basic Info
| Number | Name | Number | Name |
|---|---|---|---|
| 1 | FANUC 0I - MF CNC Controller (Japan) | 10 | Chip tray and water tank |
| 2 | Full - cover shield | 11 | Transformer |
| 3 | Automatic lubrication system | 12 | Spindle air - curtain dust - proof system |
| 4 | Anchor bolts and pads | 13 | Mechanical, electrical, and operation manuals |
| 5 | Toolbox | 14 | Rigid tapping |
| 6 | Work lamp | 15 | Electrical cabinet heat - cycle system |
| 7 | Warning light | 16 | Machine - cleaning water gun |
| 8 | M30 automatic power - off system | 17 | Three - axis guide - rail telescopic shield |
| 9 | Hand - held air - blowing gun for chip removal | 18 | 24 - arm - type tool magazine |
| Description/Machine Model | Unit | CV - 1890 |
|---|---|---|
| Travel | ||
| X - axis travel | mm | 1800 |
| Y - axis travel | mm | 900 |
| Z - axis travel | mm | 800 |
| Distance from spindle nose to worktable surface | mm | 200 - 1000 |
| Worktable | ||
| Worktable size (X * Y) | mm | 2000 * 900 |
| T - slot size (width * number of slots * distance) | mm | 22 * 5 * 160 |
| Maximum worktable load capacity | kg | 2500 |
| Spindle | ||
| Spindle motor power (continuous / 30 minutes) | kW | 15 / 18.5 |
| Spindle speed | r/min | 10 - 8000 |
| Spindle inner taper | BT50 | |
| Axes | ||
| X - axis motor power | kW | βis40 / 2000 (3.0 kW) |
| Y - axis motor power | kW | βis40 / 2000 (3.0 kW) |
| Z - axis motor power | kW | βis40B / 2000 (3.0 kW) |
| X - axis screw rod / ball screw | 055 * C3 grade / MSR55E - 2Z - C3 ball screw / | |
| Y - axis screw rod / ball screw | 055 * C3 grade / MSR55LE - 4Z - C3 ball screw / | |
| Z - axis screw rod / ball screw | 055 * C3 grade / MSR55LE - 2Z - C3 ball screw / | |
| Feed rate | ||
| Rapid feed rate (X / Y / Z) | m/min | 20000 / 20000 / 20000 |
| Maximum cutting feed rate | m/min | 1 - 10000 |
| Tool change system (optional) | set | |
| Tool magazine capacity (standard / optional) | 24 / 30 | |
| Tool magazine type | Arm - type | |
| Tool clamping form | MAS - P50 - 1 (45°) | |
| Maximum diameter of adjacent tool | mm | 0110 |
| Maximum diameter of empty - space tool | mm | 0200 |
| Maximum tool length | mm | 350 |
| Maximum tool weight | kg | 15 |
| Machine precision | ||
| Three - axis laser positioning accuracy (VDI3441 statistical method) Environmental requirements: Temperature change of machine environment within 12 hours before detection shall not exceed 4 °C, and temperature change during detection shall not exceed 2 °C | ||
| Positioning accuracy (full stroke) | mm | 0.020 |
| Repeat positioning accuracy (full stroke) | mm | 0.010 |
| System | ||
| Controller | FANUC 01 - MF | |
| Pneumatic system | ||
| Water tank capacity | liter | 350 |
| Air pressure demand | kg/cm² | 6 |
| Electricity | ||
| Power specification | AC380 ± 10%, 3 - phase, 60Hz / 50Hz | |
| Power demand | KVA | 50 |
| Others | ||
| Floor space (length * width) | mm | 6000 * 5150 (including foot - plate pressure station) |
| Machine height (maximum) | mm | 3465 |
| Machine weight | T | 16 |
Machine Features
1. This machine bed, column, spindle box and other key parts are used Meehanna (dense baking) castings, stable organization, permanent quality. The castings are analyzed by finite element analysis, reasonable structural strength and reinforcement of the matching, to provide high rigidity of the machine. The casting structure adopts one-piece molding technology, box structure, processing of large-scale pentahedral machining machine, a clamping processing is completed, the machine tool has a high rigidity, high strength, excellent geometric precision. And can ensure the long-term stability and high precision of the machine tool. In order to prevent deformation after machining, the castings are thoroughly annealed, which is favorable to eliminate internal stress.
2. Wide base, triangular box structure column, heavy load full support design, solid structure, can ensure the heavy load capacity during machining.
3. The symmetrical design of left and right, the weight balance of both sides of the column, can maintain the stability of machine accuracy. 4.
4. The spindle box is reinforced with ribs, and the contact length between the spindle box and column is appropriate to provide stable support for the spindle.
5. X/Y/Z axis adopts linear guideway with high rigidity, low noise and low friction characteristics, which can do fast displacement and obtain the best rounding accuracy. 6.
6. Rapid displacement X/Y/Z: 20/20/20m/min.
7. 3-axis servo motor adopts absolute value detection, no need to do home return every time when machining, which can improve the efficiency, and because there is no limit switch, it can reduce the failure rate and increase the reliability of the machine.
8. 3-axis servo motor and screw are directly connected by precision coupling, which can eliminate the connection gap and improve the transmission efficiency.
9. The cutting fluid capacity is up to 350L, which can quickly discharge the cutting heat. The water tank design adopts the double tank type and is placed on the inside of the machine to save space. 10.
10. the spindle adopts precision grade angled ball bearing high speed and high precision, the standard speed up to 8000rpm. the standard machine tool adopts high-horsepower spindle motor, with a higher torque output, you can choose high torque motor. 11. the front end of the spindle adopts labyrinth, which can quickly remove the cutting heat.
11. The front end of spindle adopts labyrinth design, and with air curtain protection function, which effectively prevents cutting fluid from entering into the spindle and damaging the spindle bearings. 12.
12. The electrical box adopts side-mounted design to save space and maximize the use of limited space.
1. This machine bed, column, spindle box and other key parts are used Meehanna (dense baking) castings, stable organization, permanent quality. The castings are analyzed by finite element analysis, reasonable structural strength and reinforcement of the matching, to provide high rigidity of the machine. The casting structure adopts one-piece molding technology, box structure, processing of large-scale pentahedral machining machine, a clamping processing is completed, the machine tool has a high rigidity, high strength, excellent geometric precision. And can ensure the long-term stability and high precision of the machine tool. In order to prevent deformation after machining, the castings are thoroughly annealed, which is favorable to eliminate internal stress.
2. Wide base, triangular box structure column, heavy load full support design, solid structure, can ensure the heavy load capacity during machining.
3. The symmetrical design of left and right, the weight balance of both sides of the column, can maintain the stability of machine accuracy. 4.
4. The spindle box is reinforced with ribs, and the contact length between the spindle box and column is appropriate to provide stable support for the spindle.
5. X/Y/Z axis adopts linear guideway with high rigidity, low noise and low friction characteristics, which can do fast displacement and obtain the best rounding accuracy. 6.
6. Rapid displacement X/Y/Z: 20/20/20m/min.
7. 3-axis servo motor adopts absolute value detection, no need to do home return every time when machining, which can improve the efficiency, and because there is no limit switch, it can reduce the failure rate and increase the reliability of the machine.
8. 3-axis servo motor and screw are directly connected by precision coupling, which can eliminate the connection gap and improve the transmission efficiency.
9. The cutting fluid capacity is up to 350L, which can quickly discharge the cutting heat. The water tank design adopts the double tank type and is placed on the inside of the machine to save space. 10.
10. the spindle adopts precision grade angled ball bearing high speed and high precision, the standard speed up to 8000rpm. the standard machine tool adopts high-horsepower spindle motor, with a higher torque output, you can choose high torque motor. 11. the front end of the spindle adopts labyrinth, which can quickly remove the cutting heat.
11. The front end of spindle adopts labyrinth design, and with air curtain protection function, which effectively prevents cutting fluid from entering into the spindle and damaging the spindle bearings. 12.
12. The electrical box adopts side-mounted design to save space and maximize the use of limited space.
Machine Center Application: This VMC is suitable for mechanical processing and mold making .And it can adapt to the processing requirement from rough machining to finish machining .It can also finish many working procedures like milling ,drilling ,tapping ,boring ,etc.
1. What is your product range?
A : We specialized in Vertical Machining Center, CNC Lathe, Milling Machines, Lathes, Drilling Machines, Saws, Shapers and so on.
2:What kind of controllers do you use on machines?
A :Siemens, GSK, Fanuc, Syntec etc. You can choose as your request.
3. What is your trade terms?
A : EXW, FOB, CFR and CIF all acceptable.
4 : How can I choose the most suitable machines ?
A : Please tell me model or technical parameter you need, tell us what you want to do by using CNC machining center, we can provide machine with the best price and quality.
You can also send us product pictures and we will choose the most suitable machine for you.
5: What's the payment terms ?
A : T/T ,30% deposit when order ,70% balance payment before shipment ; Irrevocable LC at sight.
6. What about the after sale service?
A:We provide one year warranty, if any parts broken, we will send you a new one for free.
7.Before sending me an inquiry on our machine, it is better for you to provide me the following information?
1)Your metal workpiece size. Because in our factory, we have different models according to working area.
2)Your workpiece materials.
Aluminum/Steel/Iron/Titanium Alloy?
3) You also can send us the drawing of your workpiece, so that we can have a moe careful check and give your more accurate suggestions.