Audited Supplier
TWZ/TPW pumps are non-self-priming, single-stage, cantilever monoblock centrifugal volute pumps with axial inlet port, radial outlet port and horizontal shaft on the base. They are available in PN16 and PN25 body pressure versions. The pumps are fitted with air-cooled asynchronous motors. The impeller and motor shaft are connected via a rigid sleeve coupling (stub shaft), or an extended motor shaft. The pumps are fitted with a mechanical shaft seal. The pumps are of the back-pull-out design, that is you can remove the motor, motor stool, and impeller without disturbing the pump housing or pipes.
To achieve world-class quality, the pump body, and impeller are mechanically molded with coated sand, machined with a four-axis CNC machining center, and finished with electrophoresis. The big pump offers a push-pull base for easy maintenance besides the standard base
| Type | Capacity Q | Head H (m) | Speed n (r/min) | Eff. η (%) | Motor Power Pa (kW) | Motor Power PM (kW) | (NPSH)r (m) | Weight (kg) | |
| (m3/h) | (L/s) | ||||||||
| 150TPW41-75/2 150TWZ41-75/2 | 333.1 | 92.5 | 45.7 | 2980 | 73.2 | 56.644 | 75 | 8.20 | 750 860 |
| 404.5 | 112.4 | 44.2 | 78.2 | 62.273 | 8.90 | ||||
| 475.9 | 132.2 | 41.2 | 79.9 | 66.843 | 9.50 | ||||
| 523.5 | 145.4 | 38.9 | 79.5 | 69.866 | 10.20 | ||||
| 571.1 | 158.6 | 35.9 | 76.6 | 73.018 | 11.00 | ||||
| 150TPW48-90/2 150TWZ48-90/2 | 359.9 | 100.0 | 53.3 | 2980 | 75.8 | 68.944 | 90 | 8.20 | 818 940 |
| 437.0 | 121.4 | 51.5 | 80.3 | 76.435 | 9.20 | ||||
| 514.1 | 142.8 | 48.1 | 81.8 | 82.290 | 9.90 | ||||
| 565.5 | 157.1 | 45.4 | 81.4 | 86.002 | 10.80 | ||||
| 616.9 | 171.4 | 41.9 | 78.5 | 89.803 | 11.40 | ||||
| 150TPW55-110/2 150TWZ55-110/2 | 385.0 | 106.9 | 61.0 | 2980 | 77.5 | 82.576 | 110 | 8.40 | 930 1070 |
| 467.5 | 129.9 | 59.0 | 81.6 | 92.111 | 9.50 | ||||
| 550.0 | 152.8 | 55.0 | 82.5 | 99.917 | 10.60 | ||||
| 605.0 | 168.1 | 52.0 | 82.0 | 104.547 | 11.00 | ||||
| 660.0 | 183.3 | 48.0 | 79.2 | 109.000 | 11.60 | ||||
| 150TWZ 57-110/2 | 353.0 | 98.1 | 63.6 | 2980 | 71.6 | 85.444 | 110 | 7.40 | 1060 |
| 428.7 | 119.1 | 61.1 | 76.3 | 93.468 | 7.40 | ||||
| 504.4 | 140.1 | 56.5 | 77.6 | 100.111 | 8.60 | ||||
| 554.8 | 154.1 | 53.7 | 74.8 | 108.532 | 9.00 | ||||
| 605.2 | 168.1 | 49.2 | 74.5 | 108.865 | 9.40 | ||||
| 150TWZ 64-132/2 | 374.3 | 104.0 | 71.5 | 2980 | 72.0 | 101.299 | 132 | 7.60 | 1180 1528 |
| 454.6 | 126.3 | 68.6 | 76.9 | 110.561 | 7.80 | ||||
| 534.8 | 148.6 | 63.6 | 77.9 | 118.891 | 8.90 | ||||
| 588.3 | 163.4 | 60.4 | 75.4 | 128.360 | 9.20 | ||||
| 641.7 | 178.3 | 55.3 | 74.8 | 129.266 | 9.60 | ||||
| 150TWZ 74-160/2 | 404.8 | 112.4 | 83.6 | 2980 | 72.2 | 127.714 | 160 | 7.80 | 1270 |
| 491.5 | 136.5 | 80.3 | 78.4 | 137.105 | 8.00 | ||||
| 578.3 | 160.6 | 74.3 | 78.8 | 148.593 | 8.80 | ||||
| 636.1 | 176.7 | 70.6 | 78.5 | 155.873 | 9.40 | ||||
| 693.9 | 192.8 | 64.6 | 78.2 | 156.322 | 9.80 | ||||
| 150TWZ80-185/2 | 420.0 | 116.7 | 90.0 | 2980 | 75.0 | 137.340 | 185 | 8.00 | 1390 |
| 510.0 | 141.7 | 86.4 | 78.0 | 153.942 | 8.40 | ||||
| 600.0 | 166.7 | 80.0 | 80.0 | 163.500 | 9.20 | ||||
| 660.0 | 183.3 | 76.0 | 78.0 | 175.238 | 9.60 | ||||
| 720.0 | 200.0 | 69.6 | 76.7 | 178.038 | 11.00 | ||||
| Attribute | Attributes | Value | Optional |
| Installation | Inlet diameter (mm) | DN150 | / |
| Outlet diameter (mm) | DN125 | / | |
| Direction of rotation | Clockwise from the motor to the pump | / | |
| Entrance orientation | level in | / | |
| Exit orientation | level out | / | |
| Base form | / | ||
| Motor | Motor model | / | |
| Number of motor phases | 3 | / | |
| Rated voltage (V) | 380 | ||
| Power frequency (Hz) | 50 | 60 | |
| Insulation class | F | ||
| Protection class | IP54 | IP55 | |
| Installation Type | B35 with flange and feet | / | |
| Energy efficiency rating | IE3 | IE4/IE5 | |
| Flange Grade | GB/T17241.6/EN1092-2 | PN16 |