Audited Supplier
E730K2
Technical/Sample/Quality
Seamless
Hot-Rolled+Cold-Drawn
Alloy Steel
as Required
for Oil Equipment
Round
Available
3.1 or 3.2 Certificate
N, Q ,T
SHUNFU
Seaworthy Standard Package
30-850mm
China
7304192000
Product Description
E730K2 1.3393 +QT Alloy Steel Tube
We offer a comprehensive range of Alloy Steel Tubes that are appreciated for superior quality and unmatched durability. These are available in different sizes, grades, specification and shapes. We can manufacture such as Seamless Pipes & Tubes as per ASTM /EN /DIN standards & other international standards. It can customize this alloy steel pipes & tubes as per the requirements of the clients.
Application
Alloy Steel Tube have hollow sections and are widely used as pipelines for conveying fluids, such as oil, natural gas, gas, water and some solid materials. It is widely used in manufacturing structural and mechanical parts, such as oil drill pipe, automobile transmission shaft, bicycle frame and steel scaffolding used in construction. Manufacturing annular parts with alloy steel tubes can improve material utilization rate, simplify manufacturing process, save material and processing time, such as rolling bearing rings, Jack sleeves, etc.Size Range
Outside Diameter : 30-850mm ;Wall Thickness : 3-100mm ;
Length max 15000mm Single Random, Double Random & Required Length.
Chemical composition
| C | Si | Mn | Ni | P | S | Cr | Mo | V | N | Nb | Ti | Al | Cu |
| max 0.2 | max 0.5 | 1.4 - 1.7 | 0.3 - 0.7 | max 0.025 | max 0.025 | max 0.3 | 0.3 - 0.45 | max 0.12 | max 0.02 | max 0.05 | max 0.05 | min 0.02 | max 0.2 |
Mechanical properties
| Nominal thickness (mm): | to 16 | 16 - 40 | 40 - 65 | 65 - 100 | |
| Rm - Tensile strength (MPa) (+QT) | 790 | 750 | 700 | 680 | |
| Nominal thickness (mm): | to 16 | 16 - 40 | 40 - 65 | 65 - 80 | 80 - 100 |
| ReH - Minimum yield strength (MPa) (+QT) | 730 | 670 | 620 | 580 | 540 |
Inspection
Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, Destructive Test Report, Non Destructive Test ReportsWe ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis - Spectro Analysis
• Positive Material Identification - PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
