Audited Supplier4 Years

Cixi Sanyang Electronics Co., Ltd.

Valve

Categories

All

Search

MadeInChina.com > Cixi Sanyang Electronics Co., Ltd. > Product > Fast Closing Valve with Explosion Proof Motor and Lower Current Consumption

Product

Fast Closing Valve with Explosion Proof Motor and Lower Current Consumption

价格	$2.80对比
发货	Zhejiang
销量	暂无
评价	已有 0 条评价
人气	已有 331 人关注
数量	+- 库存100000Pieces 起订1000Pieces

IP UnknownLearn More

Model NO.:

SY-FW4-8064

Media:

Gas

Certification:

RoHS, ISO, CE

Temperature:

Ordinary Temperature

Connection:

Thread

Pressure:

Adjustable

Closed:

Open

Structure:

Pulse

Material:

POM

Pressure Range:

0~15kpa

Trademark:

SANYANG

Transport Package:

Carton/Pallet

Specification:

1.2*0.8*1.05m

Origin:

Cixi, Ningbo, China

HS Code:

8481804090

Product Description

Flow-rate Range:	0.016~6m³/h
Working Pressure Range:	0~15kPa(150mbar)
Operating Temperature:	-20°C~+50°C
Pressure Loss:	≤50Pa(6m³/h)
Internal Leakage:	< 0.04L/h (at1.8~15kPa)
Opening Valve Time:	≤3S (DC3.0V)
Closing Valve Time:	250mS~300mS (DC3.0V)
Peak Current(Motor Start-up):	≈260mA (DC3.0V)

Operating Instructions

1.This valve is four wires valve, of which when green wire is for opening valve that connects to "-" pole and closing valve that connects to "+" pole; when grey wire is for opening valve that connects to "+" pole and closing valve that connects to "-" pole. Another two yellow wires connect to power switches

2.Valve opening process is that when green wire connects "-" pole and gray wire connects "+" pole. And when detected the status of closing, then stop power supply after some time delay (not less than 100ms). The total time for opening valve is 3s.

3.Valve closing process is that when green wire connects "+" pole and gray wire connects "-" pole. After supplied power to motor for 200ms , then detecting if the signal switch is closing. If it is off, then stop to supply power to motor; if it is not off, then supply power to switch off. And the total time for closing valve is 300ms.

4.The voltage of valve both ends shall be 2.5~5.5V when valve is operating.

5.The driving current of valve control circuit provided can not be less than the motor peak current.

6.If the parameters and structure of this internal valve changes, our company will promptly inform your company.

Disclaimer: Data sheet for reference only. All data and specifications are subject to change without notice to improve reliability, function, design or otherwise. For a detailed specification and specific application support please contact us anytime.

Valve final drawing is customized according to Gas meter inside space. We can design according to customers' requirements.

Q1: How long is your delivery time?
A:Delivery time is depends on the total quantity of order. Normally, sample can be delivered within 15 days.

Q2: Do you provide samples? Is it free or extra?
A:Yes, we could offer sample for free, but the clients has to pay for the shipping cost.

Q3: What is the MOQ of your products?
A:It normally is 1000pcs/PO of the products we already mass production. But mostly our products are customized for our customers.

Q4: Where is your factory?
A:Our factory located in Zhejiang province, we are close to Ningbo port.

Q5:What does your company need to submit a quotation?
A:After confirmed with customers on products design, we can offer mould quotation and unit price.

Q6:Why we do not have drawing here?
A:Valve always are customized to different customers. Because valves are designed according to Meter's space to assembly with .