Safety operating procedures for vibrators

1. Before use, it is necessary to check whether the rotation direction of the motor is consistent with the marked direction, whether the component connections are firm, and confirm that they are in good condition,
Only then can it be used
2. The power cord should be elevated as much as possible and checked regularly. It is not allowed to drag it randomly inside the cement mortar to avoid damaging the insulation soft wire and causing damage to the operation
Conducting electricity around
3. Operators should wear insulated gloves and insulated shoes to avoid electric shock accidents
4. After the vibration rod operates normally, the rod head should be sunk into the concrete with force, and should not be forcefully inserted. When pulling the pipe, too much force should not be applied
Be fierce to prevent damage to machinery and accidents
5. During operation, the bending radius of the hose should not be less than 50cm, and the vibration rod should not be inserted into the concrete, otherwise it may be damaged by vibration
Concrete squeezes the vibrating rod and makes it difficult to pull it out
6. When working on rainy days, efforts should be made to cover the electric motor of the vibrator to prevent rainwater from entering, and wet hands should not be allowed to come into contact with electrical appliances
Close
7. When using a rope to pull a flat plate vibrator, the cable must be kept insulated and dry, and two people should work closely together. When moving and turning, they should pedal
The two ends of the tablet must not be stepped on the electric motor
8. During operation, when the flat plate vibrator is moving, it is necessary to maintain sufficient length and looseness of the motor wires to prevent them from being tightened,
The rabbit thread was pulled off
9. The outer surface of the vibrator should be kept clean and the cement slurry should not be adhered to the motor casing to avoid hindering the motor's dispersion
Heat
10. When operating the vibrator, the temperature of the motor should not exceed 75 ºC, otherwise it should be stopped for cooling; If a malfunction is found during operation, it should be stopped

Following is the service we can offer you:
1.You can got the prompt and professional  reply from our experienced salesman.
2.Whole process of order tracking and timely reply of your requirement.
With professional technical support ,We can offer you unique product according your market requirement,also like design ,packing etc. with one-step technical service.
3.Our category manager can work with you do the work as products analysis ,target market positioning and marketing .
4.We can delivery the good quality goods to you with our  strictly  quality control during the procedure.

KLAQ tools based on factory and look ahead of the market,Welcome customer work of OEM /ODM business as well as friendship with us.

KLAQ tools- Work as one!