Audited Supplier
XPE-400 + MAC4
High Precision Power Press
Open Punch
Single Action
Crank Press
CNC
PLC Control ,Human-Machine Interface
Mechanical Drive
High Precision
CE, ISO 9001
New
GB(Japan 1 Class)
Taiwan Delta / Japan Yaskawa
Japan Showa/ Taiwan King Air
Italian Ompi
Taiwan Teco
Japan's Taco
German Rexroth/Japan SMC
Japan NTN/NSK
Japan Omron
Elimination of Internal Stress Process, CNC Precis
XUZHOUPRESS
Iron Steel Pallete
XPE-160ton-600ton
Jiangsu
8462101000
Product Description
Manufacturing Precision Standards : Japanese JIS 1 Class
1. Parameters
1) APE 160ton ~600ton Parameters
2) 3 in 1 servo Straightener Feeder---MAC1:
3 in 1 servo Straightener Feeder---MAC2:
3 in 1 servo Straightener Feeder---MAC3:
Product Features:
* With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Machine adopts high-alloy-steel, two-bent-axle, and two-wide work center, to optimize design.
* In order to guarantee relative stationarity of machine operation, it is equip with two balancers.
* Moulding-adjustment precision is as high as 0.1mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally advanced duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.
Standard Configuration:
Dry clutch brake
Standard operating system of xieduan
Operation Method Choice/inch stroke /safe journey/continuation of operating mode
Oil pressure overload protection device
Over-run safety device
Duplex magnetic valve
Misfeed detection device
Electric slider adjusting device
Digital moulding-height indicator (unit: 0.1 mm)
Electric butter lubricating device
Accumulative counter (6 digits)
Pre-determined counter (6 digits)
Maintenance counter (6 digits)
Service Life counter (6 digits)
Electronic rotary cam switch (6 connections)
Air-blast device 1/2" primary circuit
Air source connector 1/2" secondary circuit
Error inspection socket
Power socket (only apply to single-phase 110V power)
Optional Configuration:
Wet clutch brake
Die cushion device
Vs variable-speed motor
Touch-screen device
Photo-electric safety device
Knock-out device on Ram
Main motor inversion device
Foot switch
Safety dog and safety latch
T-type two-hand button operating platform
Inspection variable-connection magnetic valve
Anti-vibration mechanical foot
Quick Die Change Device
Upper die clamper
Lower die clamper
Die lifter
Mould-shift arm
Basic bolt and soleplate
Automatic feeder device
Three-in-one NC straightening feeder
NC Servo Roll feeder
Two-in-one feeder and straightening machine
Leveller
1. Parameters
1) APE 160ton ~600ton Parameters
| Name | Unit | XPE-160 | XPE-200 | XPE-250 | XPE-300 | XPE-400 | XPE-500 | XPE-600 | |||||||
| Model | S | H | S | H | S | H | S | H | S | H | S | H | S | H | |
| Capacity | Ton | 160 | 200 | 250 | 300 | 400 | 500 | 600 | |||||||
| Rated tonnage point | mm | 6 | 3 | 6 | 3 | 7 | 3 | 7 | 3 | 7 | 3 | 10 | 6 | 10 | 6 |
| Stroke | mm | 180 | 130 | 250 | 150 | 280 | 170 | 300 | 170 | 300 | 170 | 300 | 180 | 300 | 180 |
| Stroke per minute | s.p.m | 30-55 | 40-85 | 20-50 | 35-70 | 20-40 | 30-60 | 20-35 | 30-50 | 20-30 | 20-40 | 18-25 | 20-30 | 15-25 | 20-30 |
| Die height | mm | 450 | 400 | 500 | 450 | 550 | 450 | 550 | 450 | 550 | 450 | 580 | 480 | 600 | 500 |
| Slide adjustment | mm | 100 | 120 | 120 | 120 | 120 | 120 | 120 | |||||||
| Slide area | mm | 1600x650 | 1850 x750 | 2300x900 | 2300x900 | A:2300x1000 | 2900x1000 | 3100x1100 | |||||||
| B:2400x1000 | |||||||||||||||
| C:2800x1000 | |||||||||||||||
| Bolster area | mm | 1800 x760 | 2200x940 | 2500 x1000 | 2500x1000 | A:2500x1000 | 3300x1200 | 3500x1200 | |||||||
| B:2800x1000 | |||||||||||||||
| C:3200x1000 | |||||||||||||||
| Side opening | mm | 700 x450 | 900x600 | 900x600 | 900x600 | 900x600 | 1000x750 | 1100x750 | |||||||
| Main motor | KwxP | 15x4 | 18.5x4 | 22 x 4 | 30x4 | 37x4 | 45x4 | 55x4 | |||||||
| Slide adjust device | KwxP | 1x4 | 2x4 | 2x4 | 2x4 | 2x4 | 3x4 | 3x4 | |||||||
| Air pressure | kg/cm2 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | |||||||
| Presses precision | GB(JIS)1 class | GB(JIS)1 class | GB(JIS)1 class | GB(JIS)1 class | GB(JIS)1 class | GB(JIS)1 class | GB(JIS)1 class | ||||||||
2) 3 in 1 servo Straightener Feeder---MAC1:
| Model | MAC4-400 | MAC4-600 | MAC4-800 | MAC4-1000 | MAC4-1300 |
| Stock Width(mm) | 70~400 | 70~600 | 70~800 | 70~1000 | 70~1300 |
| Stock Thickness(mm) | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 | 0.6~6.0 |
| Max. Coil Weight(kg) | 5000 | 5000 | 7000 | 7000 | 7000 |
| Max. Coil O.D.(mm) | 1400 | 1400 | 1400 | 1400 | 1400 |
| Coil I.D.(mm) | 508 | 508 | 508 | 508 | 508 |
| Feed Length(mm) | ~500 | ~500 | ~500 | ~500 | ~500 |
| Max. Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 | 16~24 |
| Work Roll Number | upper4/lower3 | upper4/lower3 | upper4/lower3 | upper4/lower3 | upper4/lower3 |
| Feed Roll number | 1 | 1 | 1 | 1 | 1 |
| Main Motor(kw) | AC5.5 | AC7.5 | AC7.5 | AC11.0 | AC11.0 |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | hydraulic |
| Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 3.7 | 3.7 |
| Power (V) | 3Phase 220V/380V/50HZ | ||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | 0.49 |
3 in 1 servo Straightener Feeder---MAC2:
| Model | MAC2-400 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50~400 | 50~600 | 50~800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3~3.2 | 0.3~3.2 | ||
| Max. Coil Weight(kg) | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max. Coil O.D.(mm) | 1200 | 1200 | 1200 | ||
| Coil I.D.(mm) | 508 | 508 | 508 | ||
| Feed Length(mm) | ~500 | ~500 | ~500 | ||
| Max. Line Speed(m/min) | 16~24 | 16~24 | 16~24 | ||
| Work Roll Number | upper6 / lower5 | upper6 / lower5 | upper6 / lower5 | ||
| Feed Roll number | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power (V) | 3Phase 220V/380V/50HZ | ||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | ||
3 in 1 servo Straightener Feeder---MAC3:
| Model | MAC3-400 | MAC3-600 | MAC3-800 | MAC3-1000 | |
| Stock Width(mm) | 0.3~4.5 | 0.3~4.5 | 0.3~4.5 | 0.3~4.5 | |
| Stock Thickness(mm) | 50~400 | 50~600 | 70~800 | 70~1000 | |
| Max. Coil Weight(kg) | 5000 | 5000 | 5000 | 7000 | 7000 |
| Max. Coil O.D.(mm) | Ф1400 | Ф1400 | Ф1400 | Ф1400 | |
| Coil I.D.(mm) | Ф508 | Ф508 | Ф508 | Ф508 | |
| Feed Length(mm) | ~500 | ~500 | ~500 | ~500 | |
| Max. Line Speed(m/min) | 16~24 | 16~24 | 16~24 | 16~24 | |
| Work Roll Number | up4 / down3 | up4 / down3 | up4 / down3 | up4 / down3 | |
| Feed Roll number | 1 | 1 | 1 | ||
| Main Motor(kw) | AC4.4 | AC4.4 | AC5.5 | AC7.5 | |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | |
| Reel Motor(kw) | 2.2 | 2.2 | 2.2 | 3.7 | 3.7 |
| Power (V) | 3Phase 220V/380V/50HZ | ||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | |
Product Features:
* With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Machine adopts high-alloy-steel, two-bent-axle, and two-wide work center, to optimize design.
* In order to guarantee relative stationarity of machine operation, it is equip with two balancers.
* Moulding-adjustment precision is as high as 0.1mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally advanced duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.
Standard Configuration:
Dry clutch brake
Standard operating system of xieduan
Operation Method Choice/inch stroke /safe journey/continuation of operating mode
Oil pressure overload protection device
Over-run safety device
Duplex magnetic valve
Misfeed detection device
Electric slider adjusting device
Digital moulding-height indicator (unit: 0.1 mm)
Electric butter lubricating device
Accumulative counter (6 digits)
Pre-determined counter (6 digits)
Maintenance counter (6 digits)
Service Life counter (6 digits)
Electronic rotary cam switch (6 connections)
Air-blast device 1/2" primary circuit
Air source connector 1/2" secondary circuit
Error inspection socket
Power socket (only apply to single-phase 110V power)
Optional Configuration:
Wet clutch brake
Die cushion device
Vs variable-speed motor
Touch-screen device
Photo-electric safety device
Knock-out device on Ram
Main motor inversion device
Foot switch
Safety dog and safety latch
T-type two-hand button operating platform
Inspection variable-connection magnetic valve
Anti-vibration mechanical foot
Quick Die Change Device
Upper die clamper
Lower die clamper
Die lifter
Mould-shift arm
Basic bolt and soleplate
Automatic feeder device
Three-in-one NC straightening feeder
NC Servo Roll feeder
Two-in-one feeder and straightening machine
Leveller