Audited Supplier
Product Description
1. Diameter from 0.8 to 42mm.
2. High quality and best price
3. Large stock so the fast delivery
Our Service
We supply various material grades includes standard YG8, YG6, YG6X, etc. Using good carbide is like using thin kerf saw blades.
The differences are not dramatic but they are important. Good carbide will reduce breakage and give better quality cuts overall.
There are several types of Carbide, including advanced grades. Our R&D Team can supply you with more information about these advanced grades and tungsten carbide grades when you make the inquiry.
Detail Production Information:
YT5 has the best strength, impact resistance and seismic resistance, but poor wear resistance. It is suitable for roughing and
semi-finishing of carbon steel and alloy steel (including forgings, stampings and cast iron skins) when they are cut
intermittently.
YT14 has the advantages of high strength, good impact resistance and seismic resistance, nearly inferior to YT5 alloy, but its
wear resistance is better than YT5. It is suitable for rough turning and rough milling of carbon steel and alloy steel in
continuous cutting, semi-finishing turning and finishing turning in discontinuous cutting.
YG3X has the best wear resistance but poor impact toughness in tungsten cobalt titanium alloy. It is suitable for high-speed
finishing of small sections of cast iron non-ferrous metal and its alloy, pyroclastic steel and alloy steel.
YG6 has higher wear resistance, but lower than YG3, better impact resistance and vibration resistance than YG3X. It is suitable
for semi-finishing and finishing of cast iron, non-ferrous metals and alloys with medium cutting speed.
YG8 has higher strength, impact resistance and seismic resistance than YG6, but its wear resistance and allowable cutting speed
are lower. It is suitable for low-speed rough machining of cast iron, non-ferrous metals and alloys.
Yd201 is suitable for semi-finishing, rough machining of cast iron and light alloy, and milling of cast iron and low alloy steel.
Yw1 has a good red hardness and can bear a certain impact load. It is a universal alloy suitable for the processing of refractory
steel such as heat-resistant steel, high manganese steel and stainless steel, and also suitable for the processing of ordinary steel and cast iron.
Key Features:
1.High melting point (3410°C)
2. low thermal expansion
3.High resistance
4. Vapor pressure is low
5. Good thermal conductivity
6. High density
Application
1.Suitable for the production of ion implantation parts
2.production of electric light source parts and electric vacuum parts and elements and refractory parts
3.used as heating elements and refractory parts in high temperature furnaces
4.Used as electrode for rare earth metal industry
5.Electrode in the field of equipment and processing technology or in the lighting industry.
Grade Recommendation
Grade | ISO Range | Cobalt% | Density g/cm3 | Hardness HRA |
YG8 | K30 | 8 | 14.8 | 89.5 |
YG6 | K30 | 6 | 14.95 | 90.5 |
YG6X | K10 | 6 | 14.95 | 91.5 |
YL10.2 | K30 | 10 | 14.5 | 91.8 |
YG15 | K40 | 15 | 14 | 87.5 |
Production Features
- All carbide rods are made from the best tungsten carbide powders. The carbide rods are with submicron and average grain size ,the powder is even and stick together firmly,the purity of tungsten carbide powders is quite high.
- All carbide rods are made by the extrusion machine which insure that the inside structure of carbide rods is excellent and apprerance of carbide rods if better ,the flatness is improved a lot .
- All carbide rods are through HIP sintering which insure that the inside structure of carbide rods is free pore and can stick together firmly .Also the TRS is improved around 30% after HIP sintering.
- large stock of regular sizes of carbide rods ,which can enable us to make the delivery within 24 hours.
- Replacement .we will replace the carbide rods for you if there is any defects.
We Guarantee:
* We are real factory in Zhuzhou
* Manufactured with100% tungsten carbide raw material
* Comply with ISO 9001:2015 Certification
* Rich experience of over 20 years
* Advanced technology , automatic pressing , HIP sintering
* Full ability to accept OEM & ODM orders
* Strict inspection for quality of raw material and finished products
Our Tungsten Carbide Rod Type
Package and Dlivery Information (support customization)
Who We Are
Zhuzhou Xingzhou Carbide Co., Ltd. is a high-tech joint-stock enterprise specializing in the research and development, production and sales of cemented carbide products. We have more than 20 years of experience in manufacturing industrial tools, located in Zhuzhou High-tech Industrial Development Zone.
Why Choose Us
We can supply various types of cemented carbide cutting tools and spare parts for electric tools, such as tungsten carbide composite rods, tungsten carbide plate and strip, carbide wear parts, carbide rollers, CNC cutters, endmills, circular saw blades, saw tips, custom tungsten carbide products and DTH drill bits and hammer etc.used for mining, road and bridge construction, oil etc.Our company has in the word advanced production equipment such as pressure sintering furnace, isostatic cool pressing, actomatic pressing machines, subsequent inner stress relieving processing system , complete quality control and check -out equipment and so on.Our products are widely sold all over the world for their high quality and competitive prices. Most of our products had been exported to America, Europe, Middle East and Southeast Asia markets.We believe that the cooperation with Zhuzhou Xingzhou Carbide Co., Ltd. should be your best choice.
Our Factory
For more details,pls don't hesitate to contact us,thanks.