Audited Supplier
FPQ-35/8
High-voltage
Composite Polymer
Pin Insulator
A Type Insulator
High Voltage Power Transmission, Electrical Installation
Pin
8kn
ISO9001
Gray
Yn
35kv
YN
Carton&Pallet or Wooden Case
8kN
China
85469000
Product Description
Composite Pin Insulator
These product is used in high voltage lines, with good hydrophobic, withstand leakage tracking, and electric corrosion resistant, high anti-bending, and tensile, impact withstand, shockproof, fragile resistant, light weight, easy installation, the mounting sizes of top and bottom match with related porcelain pin insulator, interchangeable.
Main Tachnical Parameter
Material of Composite Pin Insulator
A.Shed is made of silicon rubber.
B.The core rod is made of glass-fiber reinforced epoxy resin rod (ECR type)
C.Metal fitting is made of hot dip galvanized cast steel.
D.IEC / ANSI / GB standard.
These product is used in high voltage lines, with good hydrophobic, withstand leakage tracking, and electric corrosion resistant, high anti-bending, and tensile, impact withstand, shockproof, fragile resistant, light weight, easy installation, the mounting sizes of top and bottom match with related porcelain pin insulator, interchangeable.
Main Tachnical Parameter
| Spec&Type | Rated Voltage (KV) | Rated Mechanical Tensionload | Strcucture Height (mm) | Min Arc Distance (mm) | Min Normal Creepage Distance (mm) | Full Wave Lightning Impulse Withstand Voltage (KV) | Min Power Frequency wet Withstand Voltage |
| FPQ-12/12.5M20-230 | 12 | 12.5 | 230 | 146 | 440 | 75 | 42 |
| FPQ-24/12.5M20-280 | 24 | 12.5 | 280 | 196 | 600 | 125 | 55 |
| FPQ-36/8M20-380 | 36 | 8 | 380 | 296 | 960 | 170 | 70 |
| FPQ-36/10M16-376 | 36 | 10 | 376 | 260 | 900 | 170 | 70 |
| FPQ-12/12.5T20-210 | 12 | 12.5 | 210 | 146 | 440 | 75 | 42 |
| FPQ-24/12.5T20-260 | 24 | 12.5 | 260 | 196 | 600 | 125 | 55 |
| FPQ-36/8T20-360 | 36 | 8 | 360 | 296 | 960 | 170 | 70 |
| FPQ-40.5/5T20-490 | 40.5 | 5 | 490 | 380 | 920 | 200 | 95 |
Material of Composite Pin Insulator
A.Shed is made of silicon rubber.
B.The core rod is made of glass-fiber reinforced epoxy resin rod (ECR type)
C.Metal fitting is made of hot dip galvanized cast steel.
D.IEC / ANSI / GB standard.