Audited Supplier15 Years

Nantong Yutung Industrial Co., Ltd.

Marine Fender, Yokohama Fender, Pneumatic Fender, Rubber Fender, Elevator Bucket, Elevator Belt, Impact Bar, Investment Casting, Precision Casting, Stamping Parts

Categories

All

Search

MadeInChina.com > Nantong Yutung Industrial Co., Ltd. > Product > Conveying Bucket Steel Bucket Elevator Bucket

Product

Conveying Bucket Steel Bucket Elevator Bucket

价格	$1.00对比
发货	Jiangsu
销量	暂无
评价	已有 0 条评价
人气	已有 275 人关注
数量	+- 库存100Piece 起订1Piece

IP UnknownLearn More

Model NO.:

As Drawing

Standard:

National

Type:

Transmission

Materials:

HDPE/Bylon/Carbon Steel/Stainless Steel

Product Name:

Elevator Bucket

Application:

Grain/Rice/Mill/Feed

Sample:

Free

Trademark:

Yutung

Transport Package:

by Carton

Specification:

check the table

Origin:

China

Product Description

Plastic and steel elevator bucket
D Elevator Bucket

In most cases, buckets stopped in use are caused by the heavy abrasion or impact on the bucket lip or tearing the bolt fitting due to collision in the running.
Our D bucket design will relieve such damage in use and extend the life of the bucket.

The unique design has made an appropriate thickness reduction on the bottom which requires a lower intensity, and the saved raw material will be used to increase the thickness of the bucket lip and the area around bolt holes. In this way, the buckets has higher intensity and can become more wear-resistant without increasing the total weight.

Materials:
HDPE, Nylon, PU

Usage:
1. Suitable for high-speed centrifugal discharge.
2. Recommended minimum bucket spacing: Width of the bucket projection "B"+25mm, which can be appropriately reduced according to elevator capacity requirement.
3. Recommended elevator velocity ≤ 2.5m/ s.
4. Recommend using"Z-Y+10%" as usable capacity for engineering purpose.

Model	A(mm)	B(mm)	C(mm)	D(mm /in)	E(mm/in)	Qty of holes	Hole Dia. (mm)	Capacity(L) (X-Y)	Capacity(L) (Z-Y)+10%	Capacity(L) (Z-Y)
D4× 3	107	81	75	22	50	2	7	0.32	0.28	0.25
D5× 4	133	113	106	32	60	2	7	0.85	0.65	0.59
D6× 4	159	108	103	32	90	2	7	0.87	0.72	0.65
D7× 4	184	108	103	32	120	2	9	1.04	0.83	0.75
D6× 5	168	140	130	40	90	2	9	1.48	1.21	1.10
D7× 5	192	140	130	40	120	2	9	1.73	1.32	1.20
D8× 5	211	140	130	40	120	2	9	1.92	1.55	1.41
D9× 5	237	140	130	40	85	3	9	2.41	1.93	1.75
D11× 5	289	140	130	45	100	3	9	2.75	2.21	2.01
D8× 6	211	168	154	45	120	2	9	2.83	2.28	2.08
D9× 6	237	168	154	40	85	3	9	3.23	2.57	2.34
D10× 6	266	168	154	45	90	3	9	3.62	2.84	2.58
D11× 6	287	168	154	45	100	3	9	4.01	3.11	2.83
D12X6	313	168	154	45	85	4	9	4.44	3.48	3.16
D13X6	338	168	154	45	85	4	9	4.74	3.78	3.44
D14X6	368	168	154	50	95	4	9	5.08	4.15	3.77
D9× 6-1/2	230	180	180	45	75	3	9	3.67	2.78	2.53
D11× 6-1/2	280	180	180	45	100	3	9	4.62	3.52	3.20
D10X7	269	197	180	50	90	3	9	4.83	4.07	3.70
D11× 7	287	197	180	45	100	3	9	5.39	4.35	3.95
D12× 7	326	197	180	45	85	4	9	5.81	4.79	4.35
D13× 7	343	197	180	45	90	4	9	6.52	5.58	5.07
D14× 7	373	197	180	50	95	4	9	6.90	5.74	5.22
D15× 7	392	197	180	50	100	4	9	7.61	6.68	6.07
D16× 7	427	197	180	48	85	5	9	7.94	6.95	6.32
D11× 8	280	220	216	55	65	4	9	6.52	5.40	4.91
D12× 8	331	222	206	55	85	4	9	7.45	6.35	5.77
D12× 8-1/2	330	220	216	55	85	4	9	7.88	6.55	5.95
D14× 8	378	222	206	55	95	4	9	8.76	7.56	6.87
D14× 8-1/2	380	220	216	55	75	5	9	9.24	7.69	6.99
D15× 8	392	222	206	55	80	5	9	9.47	8.73	7.94
D16× 8	434	222	206	55	85	5	9	10.38	8.91	8.10
D18× 8	473	222	206	55	95	5	9	11.50	9.98	9.07
D20× 8	520	225	210	55	90	6	9	13.11	11.66	10.60
D16× 9	430	260	260	65	68	6	11	14.57	12.10	11.00
D1109	116	92	85	25	60	2	7	0.42	0.30	0.27
D1411	145	110	96	35	60	2	7	0.75	0.71	0.65
D1311	134	115	94	35	60	2	7	0.75	0.56	0.51
D1814	188	140	130	40	120	2	9	1.70	1.49	1.35
D2314	235	140	130	40	85	3	9	2.27	1.60	1.45
D2814	280	140	139	40	100	3	9	2.70	1.87	1.70
D2816	282	168	154	45	90	3	9	3.70	3.01	2.74