Audited Supplier
MKJL
Life Time After Sales Service
1 Year
Air Classifying Mill
Chemical Mineral,Food Medicine, Chinese Medicine
380V
Vertical
Chemical Mineral,Food Medicine, Chinese Medicine
Fourth
New
Customized
Engineers Available to Service Machinery Overseas
Crushing
Equipment/Machinery
According to The Customer's Requirement
Meckey
Wooden Case
200-245KW, controlled by Variable-frequency Drive
China
8474209000
Product Description
Air Classifying Mill
Vertical Type Ultra-fine Air Classifying Mill
Application
Conventional crushing of chemical minerals, food medicine, traditional Chinese medicine etc.
Particle Size
10-2000 mesh(5um-600um),controlled by Variable-frequency Drive (VFD).
Working Principle
The material is uniformly sent into the grinding chamber by the feeding system, it is strongly impacted by the high-speed rotating moving disk, which makes the material crushed. The crushed materials are separated by the grading wheel, and the products that meet the fineness requirements are collected by the cyclone separator and the dust collector, and the coarse materials are crushed again in the crushing area.It integrates the crushing and classifying and is widely used in medicine, Chinese herbal medicine, food, health care products, chemicals, minerals, battery materials and other new material industries
Process Schematic Map
1 Feed bin 2 Crushing and classifying machine 3 Cyclone feeder 4 Finished product feeding machine 5 Pulse dust collector 6 Induced draft fan
Vertical Type Ultra-fine Air Classifying Mill Can Meet More Standard Services
01/ Wide range of application
It can crush the traditional Chinese medicine, food, chemical new materials, etc., with the characteristics of crushing and classification integration.
02/ Dust-free production
Overall negative pressure design, closed crushing system, less dust, low noise, clean and environment-friendly production process.
03/ Customized proposal
Provide customized solutions for various materials with high sugar content, fat, protein, fiber and other complex components and high crushing difficulty.
04/Finer particle size
The particle size is controllable within 10 mesh and 2000 mesh.
05/Higher classifying precision
Particles of different shapes and densities can be graded.
06/ More models of product
We can provide full-specification models at every stage from R&D, pilot test and mass production.
07/ Low maintenance cost, and long replacement cycle
Wear-resistant and wearing parts are cast with high quality Gaoming alloy material, which greatly improves the utilization degree,and the service life of equipment is long.
08/ Intelligent control system
The intelligent control system supports the process parameter storage vertical record query, and monitors the grinding working state at any time.
09/ Perfect after-sales service
We have 24-hour professional technical research & development and after-sales team, you can consult any problem during the equipment operation.
Model Selection of Product
Introduction of Product
Scope of application: Crushing of conventional materials including chemical minerals, medical food, spices, and new materials etc.
Product size: 600um~10um (30-1250mesh) air flow (air separation) classification, controlled by frequency converter.
Feeding material particle size: < 2cm, the lower the moisture content the better
Feeding method: The feeding rate is controlled by frequency converter by means of spiral conveying in silo.
Discharge method: through the cyclone or dust collector, according to the requirements of electric discharge valve, double pneumatic butterfly valve or manual butterfly valve
Working environment: on-site dust-free
Temperature control: The temperature will gradually rise in the continuous production process, which is not suitable for temperature-sensitive raw material processing
Material Selection Recommendation
Equipment Model Reference
Technical Advantages of Air Classifying Mill
01 Low loss, no residue. Under the bi-directional action of high-speed impact force and shear force, the crushing time is greatly shortened and the instantaneous rate of powder is increased.
02 High fineness of grinding. Most materials can be crushed to 30 mesh to 1250 mesh.
03 Grinding temperature is controllable. The crushing system can be equipped with water cooling and forced air cooling system to ensure the crushing temperature.
04 Low crushing cost. Less labor, short time, the grinding process is completely closed without dust overflow, and the effective ingredients are not lost. Minimal material wastage, which greatly helps to reduce production costs.
05 Simple for operation. Intelligent control, one-click start and stop production, particle size adjustment is convenient.
06 Easy for maintenance. Compact structure covers small area, easy for maintenance.
07 Clean and hygienic. Smooth inside and outside, it is a multi-purpose machine, reduce pollution and cleaning work burden.
08 Wide range of applications. It can be adapted for material which is fabrous, or with high tenacity and a certain moisture content .
09 Strong security. The material of the part in contact with the material can be customized to avoid impurity pollution.
Vertical Type Ultra-fine Air Classifying Mill
Application
Conventional crushing of chemical minerals, food medicine, traditional Chinese medicine etc.
Particle Size
10-2000 mesh(5um-600um),controlled by Variable-frequency Drive (VFD).
Working Principle
The material is uniformly sent into the grinding chamber by the feeding system, it is strongly impacted by the high-speed rotating moving disk, which makes the material crushed. The crushed materials are separated by the grading wheel, and the products that meet the fineness requirements are collected by the cyclone separator and the dust collector, and the coarse materials are crushed again in the crushing area.It integrates the crushing and classifying and is widely used in medicine, Chinese herbal medicine, food, health care products, chemicals, minerals, battery materials and other new material industries
Process Schematic Map
1 Feed bin 2 Crushing and classifying machine 3 Cyclone feeder 4 Finished product feeding machine 5 Pulse dust collector 6 Induced draft fanVertical Type Ultra-fine Air Classifying Mill Can Meet More Standard Services
01/ Wide range of application
It can crush the traditional Chinese medicine, food, chemical new materials, etc., with the characteristics of crushing and classification integration.
02/ Dust-free production
Overall negative pressure design, closed crushing system, less dust, low noise, clean and environment-friendly production process.
03/ Customized proposal
Provide customized solutions for various materials with high sugar content, fat, protein, fiber and other complex components and high crushing difficulty.
04/Finer particle size
The particle size is controllable within 10 mesh and 2000 mesh.
05/Higher classifying precision
Particles of different shapes and densities can be graded.
06/ More models of product
We can provide full-specification models at every stage from R&D, pilot test and mass production.
07/ Low maintenance cost, and long replacement cycle
Wear-resistant and wearing parts are cast with high quality Gaoming alloy material, which greatly improves the utilization degree,and the service life of equipment is long.
08/ Intelligent control system
The intelligent control system supports the process parameter storage vertical record query, and monitors the grinding working state at any time.
09/ Perfect after-sales service
We have 24-hour professional technical research & development and after-sales team, you can consult any problem during the equipment operation.
Model Selection of Product
Introduction of Product
Scope of application: Crushing of conventional materials including chemical minerals, medical food, spices, and new materials etc.
Product size: 600um~10um (30-1250mesh) air flow (air separation) classification, controlled by frequency converter.
Feeding material particle size: < 2cm, the lower the moisture content the better
Feeding method: The feeding rate is controlled by frequency converter by means of spiral conveying in silo.
Discharge method: through the cyclone or dust collector, according to the requirements of electric discharge valve, double pneumatic butterfly valve or manual butterfly valve
Working environment: on-site dust-free
Temperature control: The temperature will gradually rise in the continuous production process, which is not suitable for temperature-sensitive raw material processing
Material Selection Recommendation
| Material type | Function | Size of raw material | Particle size requirement | Output capacity | Model | Power |
| Artificial graphite: coke grinding | Pulverization and classification | < 10mm | 10-25um | 0.8-1.2T/h | MKJL1200 | 220-260KW |
| Depolymerization of graphite oversize product | Pulverization and depolymerization | < 10mm | < 10mm | 0.2-0.5T/h | MKJL 500 | 45-55KW |
| Chemicals | Pulverization and classification | < 10mm | 10-150um | 0.1-2T/h | MKJL series | - |
| Food and Chinese herb | Pulverization and classification | <10mm | 10-150um | 0.1-3T/h | MJL Series | - |
| Model No. | MKJL400 | MKJL500 | MKJL700 | MKJL800 | MKJL1000 | MKJL1200 |
| Particle size | 600um~10um | 600um~10um | 600um~10um | 600um~10um | 600um~10um | 600um~10um |
| Capacity kg/h | 10-200 | 30-400 | 50-600 | 100-1000 | 2005 200 | 300-2000 |
| Feeding material particle size,mm | <2cm | <2cm | <2cm | <2cm | <2cm | <2cm |
| Total power | 22~37.5KW | 37-51.5KW | 60-75KW | 85-95KW | 120-145KW | 200-245KW |
Technical Advantages of Air Classifying Mill
01 Low loss, no residue. Under the bi-directional action of high-speed impact force and shear force, the crushing time is greatly shortened and the instantaneous rate of powder is increased.
02 High fineness of grinding. Most materials can be crushed to 30 mesh to 1250 mesh.
03 Grinding temperature is controllable. The crushing system can be equipped with water cooling and forced air cooling system to ensure the crushing temperature.
04 Low crushing cost. Less labor, short time, the grinding process is completely closed without dust overflow, and the effective ingredients are not lost. Minimal material wastage, which greatly helps to reduce production costs.
05 Simple for operation. Intelligent control, one-click start and stop production, particle size adjustment is convenient.
06 Easy for maintenance. Compact structure covers small area, easy for maintenance.
07 Clean and hygienic. Smooth inside and outside, it is a multi-purpose machine, reduce pollution and cleaning work burden.
08 Wide range of applications. It can be adapted for material which is fabrous, or with high tenacity and a certain moisture content .
09 Strong security. The material of the part in contact with the material can be customized to avoid impurity pollution.